Back wash control Industrial Filtration System / oil filtration system

automatic back wash control system oil filtration system with ISO9001 certificate

Quick Detail:

1, function :Porous Metal Filter. 
2, Cleaning type:PSS Porous Metal Filter by backwash cleaning 
3, Installation: offshore ,industrial water processing

4, CE, ISO9001,ASME, CS certificates

Description:

Sintered stainless steel powder is normally formed by compressing a controlled blend of metal particles into their “green” state and sintering.them in a controlled atmosphere furnace into a rigid media.

The resultant medium is typically between 2-3 mm thick, ungraded through its thickness and has a fairly tight pore size distribution.

During the initial compression of the medium, the high pressures gives rise to a smooth surface finish and high density media with a maximum void volume of around 50%. This low voidage and high thickness leads to low permeability.

1, sintered porous metal filter Products Specification   

Since its establishment, BOCIN sales more than ten thousands of micro metallic filter and more than hundred thousands of sintered porous metal elements; The core technology for micro metallic filter is to use foreign latest technology, filtering accuracy can reach 0.5 micron  to 5 micron, suitable for various complex conditions.

Porous metal filter system is suitable for the filtration of high temperature and high pressure, high solid content ; there will be three method to do cleaning just like the back blowing, blasting, ultrasonic , micro metallic filter has the advantages of continuous and automatic operation, avoiding the manual frequent cleaning and unnecessary down time and maximum reduce the filtration materials and residue which will caused pollution to environment.

2, sintered porous metal filter Filter characteristics:

1, back blow filtration device reduces pollution emissions by 72%

According to almost ten years of experience and different conditions, BOCIN uses different cleaning solution, cleaning effect is equivalent to the initial state more than 95%. Greatly extending the filter using cycle, while the pollution emissions reduced by 72%.

2, The excellentelements

Filter adopts innovative unique process for stainless steel powder sintered filter elements with high strength, high opening rate, filtration efficiency can be up to 1micron 99%;

3, 100% automation

BOCIN micro porous filter is equipped with pneumatic or electric valve which can realize automatic filtering and cleaning process;

4, the mature scheme

BOCIN has many successful scheme for metal powder sintered filter, filtering capacity can be from 1~200T/H, most of them have mature drawings for the selection.

3, sintered porous metal filter Working principle:

4,Model selection:

 5, sintered porous metal filter elements specifications

Element material:  stainless steel 316 powder is made into sintered elements by YNT unique sintering process in Inert gas,before sintering ,the metal powder is without extrusion and Adhesive or other substance

Moreover there will be nickel and 300 series stainless steel and various alloy such as Inconel,Monel,Hastelloy and Carpenter 20 and etc.

Filtration precision:

Absolute accuracy:  0.5 micron to 5 micron for liquid ; 0.01micron to 20 micron for gas

Advantages:

·         up to 50% porosity. low pressure differential ,high flow rate and high capacity for holding impurity

·         fixed structure ,never no medium falling off and impurity loading off

·         high mechinery strenght,anti fatigue, wear resistance

·         widely applied in high or low temperature and Chemical stability

·         could be repeated for cleaning and backwashing

 6, Applications on site:

·         The recovery of precious metals and metal catalyst

·         slurry oil catalytic cracking device filter

·         Recovery of CTA, PTA and catalyst system in PTA production

·         Coal to olefins (MTO) catalyst recovery system

·         Purification system and exhaust catalyst regenerator

·         Hydrogenation of raw oil, recycling oil filtration system

·         Aviation fuel oil, coking distillate oil filtration system

·         Hydrogen, nitrogen, oxygen distributor

·         Flue gas dust separation

·         Fluidized bed hydrogenation process for the production of hydrogen peroxide

·         Oily sludge treatment system

·         Fiber spinning

·         Aromatic spices

·         Flue gas desulfurization wastewater treatment

·         Single / polysilicon micro filtration

·         Washing water, injection solution, beverage, filtration and clarification 

Applications:
This is the most obvious use for any porous material. Applied Porous Technologies, Inc. media, components, and assemblies are used in a wide assortment of filtration devices for filtering of both gasses and liquids. High mechanical strength and corrosion-resistance make this media well-suited for aggressive environments and will offer such benefits as long life and cleanability. Some existing applications include:
• Solvent filters for chromatography systems
• Polymer filters for processing molten plastic materials
• Catalyst recovery filters in petrochemical plants and food and beverage applications
• Gas filters for chemical processing and semiconductor manufacturing applications
• Sensor covers to protect delicate instruments in harsh environments (such as smoke stacks and exhaust pipes)
• Line filters for chemical analyzers
• Syringe filters

Competitive Advantage:

The unique combination of a sintered powdered metal construction offered in a variety of corrosion-resistant materials such as 316LSS also offers some strong benefits over other porous media technologies. In many applications, our media functions as a cost-effective, direct replacement for brass and bronze powdered metal media, providing a stronger and more corrosion-resistant option. In some applications such as in medical components and semiconductor products, 316LSS is also a more generally accepted material. In filter applications, porous metal media can replace woven screen products, for a more rigid structure that will withstand higher pressure and allow backflushing without the need for additional internal support structures. Our media has also been used successfully as a replacement for ceramic media, providing corrosion- and temperature-resistant operation while eliminating the cracking and breaking issues often associated with ceramics.

Back wash filter system

Microporous metal powder filter

Automatic control filter system