Energy Saving Residential Water Treatment Industrial Water Filteration

Energy Saving Bag Filter Housing For Industrial Water Filteration                  
        
Working principle
Bag type filter is a pressure filtration device,which is mainly composed of filtration cylinder, cylinder cover and fast open structure, stainless steel strengthen filtration bag, and etc. When filtrate flows from side entrance of filter shell into the pipe bag, the bag itself is installed inside the enhanced basket, liquid penetrates bag with required fineness grade that can be provided with qualified filtrate, impurities and particles were intercepted by bag. It is very easy to replace the filter-bags, there is hardly no material to be consumed.
 
Major advantages
Small probability for bag leakage, which effectively guarantees the filtering quality
Bag type filter can bear greater working pressure, it is of small pressure loss, lower operation cost and has obvious energy-saving effect.
Filtration degree of filter bag increased continuously, it could reach 0.5μm at most.
large capacity, small measurement, big pollutant carrying ability.
Based on the working principle and structure of bag type filter system, which is convenient to replace the filter bag and without cleaning on filter, it is time-saving and labor-saving.
Filter-bag could be used repeatedly after cleaning, it saves much cost.

Operation instruction

Simple operation, it just required that qualified micron filter bag be installed in the filter basket strainer, check working condition of the O shape sealing ring , then tighten the ring bolt of filter cover to start working. After pump is started, the pressure gauge will slightly rise, initial pressure is around 0.05Mpa,as the working time increases, the residue inside the filter housing will increase gradually, when pressure raches 0.4Mpa, the filter must be stopped working and operator should open the filter cover to check the residue in the bag, replaceable filter bag could be continue used (generally,washed bag filters could be repeated use). It is appropriate that filter pressure be setted at 0.1-0.3Mpa , but it could be adjusted through the return line or return valve on pump ,it is important that high working pressure will damage the filter bag and protection strainer.
 
 
 
 Specifications

 
APPLICATION
Polishing of vegetable oils, Lubricating oils filtration, Process water Solvents, Clarification of all low solids/high flow applications. 
 
FAQ:
 
01. What is the capacity (m3/hour)you required for this equipment?
02. What is the material for this bag filter?
Stainless steel (SS304/SS316)?
03. What is the working pressure for it?
04. What is the filtration degree?
10 micron or 200 micron?