Payment & Shipping Terms:
Dissolved Oxygen Meter
* Benchtop Dissolved Oxygen Meter
* 1 or 2 Points Calibration
* Salinity and Barometric Pressure Compensation
* USB Output
SL980 dissolved oxygen meter use a polarographic electrode to measures dissolved oxygen in water, it can display the
oxygen level as % saturation from 0 to 200% or concentration from 0 to 20ppm (mg/L).
The meter can be calibrated at one or two points - in air (100%) and/or with a zero oxygen solution, easy and quick calibration ensures accurate reading.
During calibration, if the calibration condition does not match the meter's requirement, an ERROR message is displayed.
Automatic Temperature Compensation:
The DO probe with a globular shape temperature sensor, it can provides automatic temperature compensation to ensure
accurate measuring value.
Salinity and Barometric Pressure Compensation:
Salt dissolved in solution will be limits oxygen content, SL980 meter is capable of compensates the salinity and barometric pressure after manual input coefficients.
The meter can shows various temperature and concentration units to meet users requirements. For example: mg/L and ppm, kPa and mmHg, Celsius and Fahrenheit.
SL980 meter has message indicator, it can shows many helpful messages like an on-screen manual for easy operation.
Communication Interface and Data Store:
The meter has real-time date/clock stamps, the memory stores up to 99 data sets. Press the SAVE key to store the current
measured values and it automatically generates a serial number with time. All of stored data can then be sent to a computer via the USB port.
Dissolved Oxygen Range: 0.00 to 20.00mg/L or ppm
Dissolved Oxygen Accuracy: ±0.3mg/L
% Saturation of Oxygen: 0.0 to 200.0%
Temperature Range: 0.0 to 50.0°C, 32 to 122°F
Temperature Accuracy: ±1°C, ±1.8°F
Temperature Compensation: 0.0 to 40.0°C, Automatic
Salinity Correction: 0 to 35g/L
Barometric Pressure Correction: 450 to 50mmHg, 60.0 to 112.5kPa
Calibration Points: 1 or 2 points, 100% in air or 0% in solution
Memory: 99 data sets with Date/Time stamping
Output: USB Communication Interface
Power Requirements: DC 9V, using AC adapters, 220VAC, 50Hz
DO Probe (Made in US), DO Membrane Kit, DO Electrolyte Solution, Power Adapters
Contact Person: Miss.