K-200 Excellent Rust Remover Cleaner Rust Stain Remover EDM Consumables

K-200 Excellent  Rust Remover Cleaner  For EDM Wire Cut Machine
Function:
 
 1. Strong Rust Grease Removal Property 
 2. Metal Surface Protection 
 3. Prevent Excess Corrosion and Rust Recursion
 
Apply for:
 
1. Wipe and clear rust and sludge in wire-cutting processing equipment , Excellent on copper, stainless steel and aluminium.  
2. Most suitable for wiping and removing rust of large-size workpieces incapable of being dipped
3. Remove the rust formed during wire EDM operation
4. Clean the sludge formed on wire EDM and wire guide
5. Remover the rust formed on metal parts and equipments during storage and in other processes
 
 
CHARACTERISTIC
 
Strong Rust Grease Removal Property
Quickly remove rust (5-10 minutes) while protecting metal surface.
Due to its degreasing properties, enables to remove rust from oily metal surface and clean sluge on wire EDM.
 
Metal Surface Protection
Revive lustrous metal surfacewithout causing discolouration.
Enable to challenge high quality Die/Mould production as precise as micro meters.
 
Anticorrosion
Rust Remover K-200 contains some particles with anticorrosive properties, therefore it prevents excess corrosion and rust recursion.
 
Safety
Rust Remover K-200 composed with harmless compounds to people.
Unlike hydrochloric acid or nitric acid, produce no poisonous gas, irritation.
Prevent surrounding machinery from rusting.
Non flammalbe, non explosive
 
PROPERTY

 
 
 
DIRECTION FOR USE
 
Immersing use
1. Immerse rused work piece into undiluted Rust Remover K-200 for 5-10 minutes.
Rinse with water immediately after removed rust.
Note: Use plastic container for immersion.
2. Immerse into anticorrosive agent then dry it by air blower or by using a rag.
3. Once discolouration occurs or rust removal properties have noticeably decreased, it is advisable that the content is replaced with new agent rather than addition of new agent to content. This replacement procedure improves overall efficiency and durability of the agent.
 
 
Rust Cleaner applicable For Wire EDM machine RVH-600 Rust preventive 23353-145 Charmilles machine
 
 
Introduction   
 ------Remove rust, sludge and carbon immediately that occurred on the guidess, control box and work tank of wire cut machines.    
-----Remove rust and carbon on the workpieces. Excellent on copper, stainless steel and aluminium.           
------No damage to the shine of metalli surfaces and precents yellowish discolouration.                        
------After removal, wipping with a dry cloth make the machine glow and the effect lasts for 1-2 months.    
 ------After putting on a cloth and wiping , get rid of moisture with a dry cloth or air. possible to dilute and use  
Rust Remover Cleaner for EDM Machines Model No. Name  Code No Discription KC-12 Rust Remover
Rust Cleaner 29658-97-7  All kind edm machines K-200 Rust Remover
Rust Cleaner Not applicable Wire EDM machine RVH-600 Rust preventive 23353-145 Charmilles machine
 
  Characteristic:
1. Strong Rust Grease Removal Property
Quickly remove rust (5-10 minutes) while protecting metal surface. Due to its degreasing properties, enables to remove rust from oily metal surface and clean sluge on wire EDM.
 
2. Metal Surface Protection
Revive lustrous metal surfacewithout causing discolouration. Enable to challenge high quality Die/Mould production as precise as micro meters.