Two Wire or Four Wire Ultrasonic Sludge Level Analyzer / Meter For Wastewater USL10AC
1. Application
Measure sluge blanket level of sedimentation tank.
• Water supply plant
Sedimentation tank
• Wastewater treatment plant
Primary sedimentation tank, sedimentation tank, thickening tank
• coal preparation plant
Sedimentation tank, Concentrating pool
• power plant
Mortar sedimentation tank
2. Features and Benefits
• Based on the principle of reflected ultrasound, the analyzer is easy to be operated.
• Self-cleaning system is optional to reduce the maintenance.
• The ultrasonic energy emission is automatically adjustable to a variety of medium and a wide measurement range.
• Advanced circuit design and software algorithms make the analyzer unaffected by intisu interference.
• Large LCD screen displays the measurement data and the graph of sludge layers.
• The menu is available in Chinese or English.
• Isolated 4~20mA output
• Advanced self-diagnostics
• Profibus DP is optional.
• 3 Relays can be set Upper limit, lower limit and Failure alarm
3. Specifications
|
Performance characteristics
|
|
Measuring Range
|
0~12m
|
|
Resolution
|
0.01m
|
|
Accuracy
|
±1%FS
|
|
Response time
|
10~600s adjustable
|
|
Temperature compensation
|
Automatic
|
|
Display
|
LCD displays date, time,measurement value, trendline, etc., available in both Chinese and English menu
|
|
Data storage
|
Automatic Data Storage, power-off data protection
|
|
Setup
|
Completed by transmitter pushing the buttons on the transmitter
|
|
Outputs
|
|
Analog Outputs
|
one isolated 4-20mA output( maximum 800 ohms), optional selection of 3.8mA or 21mA(under the condition of malfunction)
|
|
Relay outputs
|
3 Relays with programmable hysteresis, can be set to alarm function or timer function
|
|
Relay capacity
|
2A, 250VAC
|
|
Digital Communication
|
MODBUS RS232/RS485,Profibus DP is optional
|
|
Power supply
|
|
AC power supply
|
85~265 VAC, 50Hz/60Hz
|
|
DC power supply
|
24 VDC ±10%
|
|
Physical parameters
|
|
Dimension of Transmitter
|
270×205×100mm(W×H×D)
(10.6*8*3.9 in.)
|
|
Dimension of Sensor
|
Φ64×85mm (2.5*3.4 in.)
|
|
Materials
|
--Transmitter: PC
--Sensor: 316L stainless steel
|
|
Process connection of sensor
|
1 inch cone male thread
|
|
Environmental conditions
|
|
Ingress protection
|
--IP66 (transmitter)
--IP68 (Sensor)
|
|
Operating Temperature
|
--Transmitter: -20~60℃
--Sensor: 0~50℃
|
|
Operating Pressure
|
≤7.5Bar
|
|
Air Cleaning Pressure
|
0.7~3Bar
|
4. Ordering Information
|
Ordering Information
|
|
Transmitter Selection
|
|
|
Channel number
|
Signal output
|
Power version
|
|
USL
|
|
|
|
|
|
code
|
meaning
|
code
|
meaning
|
code
|
meaning
|
|
|
1
|
Single channel
|
0
|
4~20mA
|
AC
|
220VAC
|
|
|
2
|
Dual channel
|
1
|
RS 485(Modbus)
|
DC
|
24VDC
|
|
|
|
|
2
|
Profibus DP
|
|
|
|
Example:
USL10AC, single channel sludge level transmitter, output 4~20mA, 220V AC Power Supply.
|
|
Sensor Selection
|
|
|
Install mode
|
Cable length
|
|
USL-S
|
|
|
|
|
code
|
meaning
|
code
|
Meaning
|
|
|
0
|
Immersion installation
|
C10
|
10m cable
|
|
|
|
|
CXX
|
XXm cable
|
|
Example:
USL-S0C10, a DO sensor, immersion-typed install , with 10m cable.
|
(3) Accessories
FA0000: Immersion mounting bracket, stainless steel
FA0001: Immersion mounting bracket, PVC
FA0900: Stainless steel adapter
FA0901: PVC adapter
FA0800: Instrument protective housing, stainless steel
FA0810: Instrument protective housing, stainless steel, with heater unit
FC0200: Automatic cleaning accessories
Your message must be between 20-3,000 characters!
Overall Rating
Rating Snapshot
The following is the distribution of all ratingsAll Reviews