Fixed Type Ultrasonic Flowmeter Wall Hanging Digital Flow Meter TUF-2000S Wall-mounted Type

 Item

 Performance and Parameter

 Convertor

 Principle

 transit-time ultrasonic flowmeter

 Accuracy

 Flow: over 1%-2%(battery-powered supply over ±2% ),Heat: over ±2%,Repeatability: over 0.2%

 Display

 2×20 character LCD with backlight, support the language of Chinese, English and Italy Convertor dimension:170*180*56cm

 Operation

 Support 16 key light touch keyboard and the Simulation keyboard software

 Signal Output

 1 way 4~ 20mA output, electric resistance 0~ 1K,accuracy0. 1%

 1 way OCT pulse output( Pulse width 6 ~ 1 0 0 0 ms,default is 2 0 0 ms)

 1 way Relay output

 Signal Input

 3 way 4~ 20mA input, accuracy 0. 1%,acquisition signal such as temperature, press and liquid level

 Connect the temperature transducer Pt100, can finish the heat/energy measurement

 Data interface

 Insulate RS485 serial interface, upgrade the flew meter software by computer, support the MODBUS, METER-BUS etc.

 Other Function

 Automatically remember the previous flew/energy data of 512 days,  128 months and 10 years

 Automatically remember the previous flew/energy data of 512 days working condition and check it

 Automatically remember the previous 32 times power on/off time and flow rate

 Special Cable

 Twisted-pair cable, generally, the length under 50 meters;Select the RS485 communication. The transmission distance can over 1000m.

 Pipe Condition

 Pipe Material

 Steel, Stainless steel, Cast iron, Copper, Cement pipe, PVC, Aluminum, Glass steel product, liner is allowed.

 Pipe Diameter

 15---6000mm

 Straight length pipe

 Transducer installation should be satisfied: upstream10D, downstream 5D, 30D from the pump.

 Measuring Medium

 Type of Liquid

 Water (hot water, chilled water, city water, sea water, waste water, etc.);  Sewage with small particle content; Oil (crude oil, lubricating oil, diesel oil, fuel oil, etc.);  Chemicals (alcohol, acids, etc.); Plant effluent; Beverage, liquid food; Ultra-pure liquids; Solvents and other liquids

 Temperature

 Standard Transducer: -30--90℃; High-temperature transducer: -30--140℃

 Turbidity

 No more than 10000ppm and less bubble

 Flow rate

 0--±7 m/s

 Working Environment

 Temperature

 Main Unit: -20--60℃

 Flow transducer: -40--160℃;
Temperature transducer: according to the customer’s demands.

Humidity

Main Unit: 85% RH; Flow Transducer: Ip67

Power Supply

DC  24V or AC  85-264V

Power Consumption

1.5W