Payment & Shipping Terms:
|Name:||Dewatering System Steel Mill Sludge||Model:||PDC-10|
|Length:||1000mm||Length To Dia Rate:||4|
sludge dewatering systems,
wastewater treatment system
LW450 Decanter Centrifuge Wastewater Treatment Plant Equipment for Solid Liquid Separation
Sludge dewatering complete system could be used in the following occasions:
There are five parts included in the whole sludge dewatering complete system.
Made up of sludge cutting pump, sludge feeding pump, electromagnetic flowmeter, electric valve, hand valve, pipe, turbidity meter, ultrasonic level meter and centrate turbidity meter.
Flocculant Adding System
JYZZ flocculant adding system is automatic mechanical equipment that can make up polymer solution from PAM powder. By batch throwing the powder, the polymer can reach full mature and achieve its effect. JYZZ series dosing system can carry ] out remote control. Therefore, it is safe, convenient, reliable and applicable for various purposes. It is especially fit for city domestic sewage treatment, industrial wastewater treatment and other industries that needs dosing chemical solution.
The design of this dosing system can also be altered to fit for the requirement. This makes it able to fit for special needs from customers.
The working principle of JYZZ flocculant adding system is described as follows. PAM polymer powder runs
through adding device, measured by flowmeter and mixed in jet flow to change into mixture solution. Solution flow into stirring tank and undergoes gentle stirring, where the polymer fully dissolved and flow through valves (which are electrically controlled) into storing tank. When it is needed to use the solution, the adding pump pumps the solution into the mixing equipment, wherethe solution mixes with water. Then the solution feeds into the centrifuge or other kind of separation equipment and reacts with small particles in the treatment stuff, producing flocculant for solid liquid separation. By adding polymer in industrial wastewater or municipal wastewater, the treatment throughput of equipment can be improved. While operating the adding system, the valves and adding pump can be adjusted to change the water flow rate and powder flow rate to achieve good separation effect and economy cost.
Three are three types of the control system of SCI sludge dewatering complete equipment.
Simple Control System
This kind of control system is composed of ordinary electric components. It is able to operate automatically/ manually the separation machine system, feed system, chemical adding and throwing system. It can also monitor operation of main equipments, alarm troubles and protect by interlink. This system can meet the need to control complete set for single machine.
PLC Control System
It is well-known that PLC is widely used in industrial auto control system, because of its stable operation, resistance to disturbing, safety operation, easy configuration and software programming. SCI developed PLC control System for sludge dewatering complete equipment to fit for the complicated treatment and high requirements from sludge dewatering. It can automatically adjust the differential speed and feed flow rate. This control system is highly automated. It can operate the factory without human. It can display many specifications and has more than 30 kinds of trouble monitoring, alarming and protecting functions for equipment operation. This will make the whole working system more safe and reliable.
PLC Controller + PLC Control System
The above-mentioned PLC control system can communicate with the central control room PC through network by means of communication interface to on-site PC or network communication system demanded by customer.
Able to control automatically as above-mentioned PLC control system;
Able to monitor dynamically the sludge dewatering on the PC screen, the working conditions of all the
equipments and other related specifications are displayed as figures;
Able to draw the history trend curve of specifications;
Able to display and print report form for a day, a month or a year;
The on-site PC and central control upstream computer can monitor the working status of several sets of sludge dewatering equipments. It can also remote control the starting or stopping of each sludge dewatering set.
To avoid unauthorized person from entering the system, it has setting functions in three levels.
Peony Centrifuge has been dedicated to producing machinery and equipments and carrying out facility construction, pursuing the best quality and producing the best product at the same time.We are committed to reward you with a better quality in return for our interest in and faith toward.We will do our utmost for one more stepping forward, based on our infinite services and trust to customers.
Contact Person: Miss.