Payment & Shipping Terms:
|Controller:||Korean TEMI 880 Programmable Controller||Humidity Range:||About 45%~70% R.H.|
|Material:||SUS 304 Steel||USE:||UV Aging Test Chamber|
|Product Name:||Uv Test Chamber||Temperature Control:||PID SSR Control|
|Voltage:||220V/50Hz /±10% 5KW||Studio Size:||1140Wmm×400Dmm×500Hmm|
UV Lamp Tester,
Accelerated Weathering Tester
PID SSR Control UV Aging Test Chamber / Ultraviolet UVA Light Tester In Lab
The world's most widely used UV aging chamber, which is used in more labs throughout the world than any other accelerated weathering tester.
Standard has become the world standard in the accelerated weathering test in lab.
The damage of the material caused by the sunshine rain and dew reappears quickly and truly. It only needs several days or weeks to reappear the damage by using QUV, which damage appears in the several months or years under outdoor condition. These damages include: bleaching, discoloration, loss of light, powder, crack, turbidity, bubble-based, embrittlement, strength decline and oxidation.
According to the reliable aging test date, you can predict the ageing resistance of the products, and is helpful to choose optimize the products.
It's used widely in the industry, such as coating, printing ink, paint, resin, plastics, print, packaging, bond, motor van, makeup, metal, electron, galvanization, medical, and so on
|Chamber material||SUS#304 stainless steel|
|Temperature control||PID SSR control-PID self - tuning temperature control mode|
|Humidity range:||about 45%~70% R.H.|
|Controller||Programmable controller, LCD touch screen|
|Control mode||Balance temperature humidity control (BTHC)|
|Test cycle setting||Exposure, condensation and water spray test cycle is programmable|
|Distance from sample to lamp||50±2mm|
|Centre distance between the lamp||70mm|
|UV lamps||Imported Atlas UV-A: 315-400nm (8pcs, 1600h lifetime)|
|Standard Specimen Size||75×150mm (48pcs)|
|Testing time||0～999H, adjustable|
Overload short circuit protection
Over temperature protection
Water lacking protection
Earth leakage protection
Auto shut off protection
The inner bladder of the chamber is made of imported high-class stainless steel plate while the outer bladder is made of SUS 304 steel plate.
The heating mode adopts inner bladder trough type heating with its rapid temperature rise and even temperature distribution.
Adopts black aluminum plate to connect temperature sensor and adopts black board temperature meter to control heating so as to ensure more stable temperature.
The radiometer probe is fixed so as to avoid the frequent installation and disassembly.
The radiation quantity adopts the special UV irradiatometer with high-precision display and measurement.
The radiation intensity is not more than 50W/m2.
The illumination and condensation can be controlled independently or alternating and circularly.
Test Specimen Mounting:
The standard test specimen holder accommodates 2 panels 75×150mm. The test panels are actual the side wall of the chamber. To properly seal the chamber, it is important to have every panel holder filled with specimens or blank panels and to have panel holders in place.
(1) ASTM D4587: Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings
(2) ASTM D4799: Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Fluorescent UV, Water Spray, and Condensation Method)
(3) ISO 4892-1: Plastics – Methods of Exposure to Laboratory Light Sources – Part 1: General guidance
(4) ISO 4892-3: Plastics - Methods of Exposure to Laboratory Light Sources - Part 3: Fluorescent UV Lamps
(5) ASTM D4329: Standard Practice for Fluorescent UV Exposure of Plastics
(6) AATCC TM186: Weather Resistance: UV Light and Moisture Exposure
(7) ASTM D5208: Standard Practice for Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics
(8) IEC 61345: UV Test for Photovaltalic (PV) Modules
Contact Person: Miss.